欢迎您来到东光县正奇包装机械厂
联系人:13603338138 | 网站地图

电脑三层、五层高速瓦楞纸板生产线

电脑三层、五层高速瓦楞纸板生产线用途与特点: 

1、材料选用   铬钼合金钢。

2、瓦楞形状为   通用UV形,经设计,缩纸率低,压制出的纸板质量好,。

3、采用      机床,   的成型磨削和电脑分度工艺,楞型尺寸精度符合   标准。

4、楞齿表面经碳化钨或中频淬火处理,硬度达到HR60°以上。上瓦楞辊有中高,呈腰鼓形,使用寿命长。

Function and features:

1、The corrugating roll is made of chrome molybdenum alloy steel。

2、UV type is selected for corrugated rollers.which are elaborately designed with lower take up ratio and high cardboard intensity。

3、Con'ugated roller ground with advanced molding and computer indexing technology and guarantee the size of corrugation conform to national standard。

4、Surface manufacture with intermediate frequency quenching heat treatment.hardness have reached up to HR60°,which is characterized by perfect flute and long service life。

瓦楞纸板生产线故障排除:

1、瓦楞纸卷曲成筒状,主要原因是上下辊筒温度差过大。应检查上、下辊筒内加热源工作情况,或许其中之一出现故障,可予以修理或   换。

2、瓦楞纸粘在瓦楞辊面上。辊面温度过高或原纸水分含量过大都会出现这种现象。此时应调整辊面温度,使纸张干燥后再压楞,若刮刀与辊槽不贴合,应调整或   换。

3、瓦楞的高度不够,原因可能是压力或温度过低,或者纸张含水分过高。解决办法是调整压力或辊温,或降低车速,使纸张得以干燥。

4、瓦楞高度不均一,压出的瓦楞纸两边长短不同呈扇形。这是由于瓦楞辊平行度不好或两端压力不均匀所致。如左边瓦楞纸比右边短,则应适当地将上瓦楞辊左边升高,否则逆向调整。

瓦楞纸板生产线概述:

瓦楞纸板生产线是生产瓦楞纸板的设备。主要由原纸架,面(芯)纸预热(调)器,单面瓦楞机,输送天桥,涂胶机,双面机,纵切压线机,横切机, 堆码机以及加热系统,空气压缩系统.制胶系统,电器控制系统等主要设备组成。不同型号和不同数量的设备可组成高,中,低三种不同规格,不同档次的三,五,七层瓦楞纸板生产线。本厂在吸收      技术.广泛了解用户需求的基础上.设计速度自60-180/min。纸幅从1400-2200mm,UV形A. C,B,E,四种楞型的三.五,七层瓦楞纸板生产线按需选择。

Corrugated Cardboard Production Line Introduction。

TiIe’S staring blankly a carton production Iine iS the aDprOp riatiOn equipments which produce tile to stare blankly carton.Main from the original paper.noodles(Xin)paper prepare hot(adjust)the machine,one side tile stare blankly machine,transport overpass。

Tu2 Jiao Ji。two-sided machine,Zong to slice to press line machine,horizontaI slice the machine。heapcode machine and heat system,air compress system,make gum system,electric appliances controI system etc.the mainequipments constitute.The equipments of dissimilarity modeI number and dissimilarity amount can constitute Gao,medium,three kinds of IOW dissimilarity specification.dissimilarity the 3,5 and 7 F tile of the file time stare blankly a carton production Iine.MY plant at absorb domestic and internationaI forerunner technique.extensive understanding customer need of foundation up。development design the speed iS from the 60-1 80/min.The paper iS frOm the 1400-2200 mm,UV form A,C.B,E.four kinds of 3.5 and 7 F tile which stare blankly a type stare blankly a carton production Iine to press to need a choice。

楞型 Type of corrugation A B BC B
瓦楞形状 Shape of corrugation UV
瓦楞数 No.of corrugation 34±2 38±2 46±2 50±2
瓦楞高 Highness of corrugaction 4.6~5.0 3.6~3.9 3.0~3.5 2.6~2.9
辊身外径 Diameter of roller 215~310
辊身长度 Length of roller 1450~2050
江苏电脑三层、五层高速瓦楞纸板生产线广东电脑三层、五层高速瓦楞纸板生产线浙江电脑三层、五层高速瓦楞纸板生产线河南电脑三层、五层高速瓦楞纸板生产线山东电脑三层、五层高速瓦楞纸板生产线