GK-480型全自动轮转开槽机

GK-480型全自动轮转开槽机：把台面连同框条前后推动，比方要定框条外面钉子的位置就要调台面后方下面的大螺杆进行定位，要定框条里头钉子的位置就要调台面前方下面的大螺杆进行定位，根据自己需要调节定位好之后，再把所需要的钉子放进钉槽。如果模具头高低不配，就把模具头的螺丝拧松，换上相配的模具头。放进角钉，角钉的胶水面朝上，凸面朝机器后方，放好后，再把送钉器装上，橡皮筋装在送钉器后面（启到挤钉作用），钉子和调位工作做好后，两根框条就可以放上台面拼角，人是坐在机器前面工作的，左脚踩脚踏板，机器的夹子就夹住框条，压杆同时压下来（注意，手指不要被夹子夹住）。先打框条里面的的钉子，手指抓住框条中间或台面的两支圆杆，把台面推前，左脚不要松开，右脚再踩钉框。

GK-480 type full automatic rotary slotting machine: the table together with the frame before and after promoting, for example, to frame outside nail position to table below the rear of the big screw positioning, to frame inside nail position we should tune in front of the platform is below the big screw positioning, root according to their own need to adjust a good location, then the need to nail into the nail slot. If the die head is not fit, put the die head screws loose, replaced with a matching die head. Put Brad, facing Brad glue, convex facing the rear of the machine, after that, then the nail feeding device is arranged on, rubber band installed in the nail feeding device behind (Rev to squeeze nail), nails and adjusting the position of the work done, two frame strips can be placed on the table to fight angle, who is sitting in the front of the machine working face, his left foot on the pedal, machine clip clips frame, pressure bar and press down (pay attention to safety, the finger should not be caught in a trap). First hit the box on the inside of the nail, the finger to seize the box in the middle or the table of the two round bar, push the table before, the left foot do not loose, right foot and then step on the nail box.

GK-480型全自动轮转开槽机技术参数：

切角机重量：70kg电压：220v功率：1.1kw切钉厚度/宽度：7cm/20cm工作台面：500x600MM台面厚度：5mm外形尺寸：65x600x90cm气缸数/锯片：无/锯片钉角机重量：60kg电压：220v功率：0.1kw切钉厚度/宽度：7cm/15cm工作台面：400x460MM台面厚度：10mm外形尺寸：56x63x110cm气缸数/锯片：2/气缸   型号切角机重量：65kg电压：220v功率：1.1kw切钉厚度/宽度：7cm/20cm工作台面：600x700MM台面厚度：7mm外形尺寸：60x70x90cm气缸数/锯片：无/锯片钉角机重量：60kg电压：220v功率：0.1kw切钉厚度/宽度：7cm/15cm工作台面：400x460MM台面厚度：10mm外形尺寸：56x63x110cm气缸数/锯片：4/气缸高   型号切角机重量：65kg电压：220v功率：1.1kw切钉厚度/宽度：7cm/20cm工作台面：650x700MM台面厚度：8mm外形尺寸：65x70x90cm气缸数/锯片：有/锯片钉角机重量：65kg电压：220v功率：0.1kw切钉厚度/宽度：7cm/15cm工作台面：400x460MM台面厚度：10mm外形尺寸：56x63x110cm气缸数/锯片：4/气缸。

GK-480 type automatic rotary slotting machine technical parameters:

Weight: 220V voltage: 1.1KW cutting thickness / width: 500x600MM thickness: 5mm surface size: 65x600x90cm the number of cylinders / saw blade: no screw angle machine weight: 220V voltage: 0.1kw power: 7cm/15cm cutting thickness / width: 400x460MM table thickness: 10mm size: 2/: 220V: 65kg: 1.1KW thickness: 7cm/20cm thickness: 7mm 600x700MM: 60x70x90cm: 60kg: 220V: 60kg: 0.1kw: 400x460MM: 7cm/20cm thickness: 7cm/15cm: 56x63x110cm 10mm 70kg 56x63x110cm number / saw blade: 4/ cylinder high precision angle cutting machine weight: 65K G voltage: 1.1KW power: 650x700MM thickness / width: 7cm/20cm table top: 8mm surface thickness: 65x70x90cm size: 220V cylinder number / saw blade: voltage: 65kg voltage: 220V power: 0.1kw cutting thickness / width: 7cm/15cm working table: 400x460MM mesa thickness: 10mm size: 56x63x110cm cylinder number / saw: 4/ cylinder.