• 加入收藏设为首页
  • 公司首页
  • 公司简介

  • 新闻动态

  • 产品展示

  • 联系我们

  • BL2400-A全自动粘箱机
    产品名称:

    BL2400-A全自动粘箱机

    产品描述:

    BL2400-A全自动粘箱机输送机构有链式推送机构、圆物送进机构、吸盘供送机构、薄纸供送机构、小端立装置等。

    详细信息

    BL2400-A全自动粘箱机输送机构有链式推送机构、圆物送进机构、吸盘供送机构、薄纸供送机构、小端立装置等。

    1、链式推送机构。它是在链条上安装与装箱外形吻合的推板,做为装箱的推送装置。推板是向一个方向,间歇、连续的运功。

    2、圆物送进机构。这种国物输送属不稳定物品。它是用在推杆上装的钳爪夹持制品到预定位置,钳爪上的圆物一旦脱离,推杆即回原位,继续下一次供送。

    3、吸盘供送机构。扁平的袋装物、箱装物、纸板和其它比较薄的物品都可用吸盘供送。在要求供送速度快时,也可同时用两个吸盘。

    4、薄纸供送机构。它是利用橡胶滚子的摩擦力来实现输送的。单张纸的供送多用这种装置。为了保证一次供送一张纸,另装有两个回转针轮,只有当一张纸送出后才能切离,供送下一张纸。

    5、小端立装置。一般在输送终了时制品常是松散的。为了使下一道工序顺利工作,常浦缩短制品间的间隙。这就需要制品处于小端立状态。小端立装置常是由里形轮、推杆、杠杆组合构成。为了使制品小端立状态稿定,在两侧常装有导向刷子。

    BL2400-A full automatic sticky box machine transport agency mechanism for pushing chain, circular material feeding mechanism, a sucker for feed mechanism, tissue for feeding mechanism, the small end of the device etc..

    1, chain push mechanism. It is installed on the chain and the packing shape of the push plate, as the packing push device. The push plate is a direction, intermittent and continuous operation.

    2, round object feeding mechanism. This kind of country is unstable. It is used in the push rod of the clamping claw clamping products to the predetermined position, the circle on the jaw, once out, the push rod that is back in situ, to continue the next time for delivery.

    3, suction cup feeding mechanism. Flat bags, cartons, cardboard, and other relatively thin items are available for use with a suction cup. At the request of the feeding speed, but also can be used at the same time two suction cups.

    4, paper feed mechanism. It is the use of rubber roller friction to achieve. Multiple use of single sheet paper feeding device. In order to guarantee a piece of paper, the other is equipped with two rotary pin wheel, only when a piece of paper can be cut off, to send the next piece of paper.

    5, the small end device. Usually at the end of the delivery products are often loose. In order to make the next working procedure work smoothly, the gap between the products is shortened. This requires products in the small end of the state. The small end device is often from inside wheel and push rod, lever combination. In order to make the small end product release state, often on both sides of a steering brush.